Nexiq Technologies Bendix Application

Features and Benefits

• Bendix ABS/ATC application software provides the capability to test and diagnose vehicles using EC-15, EC-16, EC-17 and EC-30/30T (Tractor and Trailer) Bendix systems
• Display fault codes
• Display front, middle and rear MPH
• Check battery voltage
• New Diagnostic Code Information

NEW FEATURES
ABS6 (EC-60)/TABS6 Tractor Systems

• New Diagnostic Code Information
• Dynamic System Tests:
  • ECU Inputs/Outputs
  • Valve Cycle Tests
  • End of Line Tests
• Display Full Data List
• Reset ECU
• View & Edit System Configuration

FEATURES

• Bendix tractor and trailer support
• End of line test
• Trailer odometer reading/setting
• J1939 data link status
• Modify ECU configuration:
  • trailer ABS setting
• J1587/J1708/J2497/J1939 broadcast options
• Power Line Carrier (PLC) Test application for trailer ABS

INCLUDES:

• Application card
• Manual

PCMCIA

The Bendix ABS/ATC application software provides the capability to test and diagnose vehicles using EC-15, EC-16, EC-17 and EC-30/30T (Tractor and Trailer) Bendix systems. To address advanced capabilities provided by Bendix, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Bendix. The following list contains all of the features and functions available with this card.

FUNCTIONS

• Display fault codes
• Display front, middle and rear MPH
• Check battery voltage
• Check warning and traction lamps
• Check engine and retarder data link
• Check retarder relay
• End of line test
• Runs ABS system component tests
• System configuration adjusts tire size
• Change settings of system parameters
• Clears active and history faults
• Snapshot mode for capturing intermittent problems
• Create custom data lists
• Printer output capabilities

POWER LINE CARRIER (PLC) TEST APPLICATION FOR TRAILER ABS

Effective March 2001, a Federal Government mandate required that heavy-duty trucks have an in-cab trailer ABS warning lamp. Using a new SAE standard called PLC communication, the change requires trailer ABS ECU’s to communicate with the tractor ECU via the J560 power line to activate the warning lamp. NEXIQ’s PLC Converter (sold separately) is also required for PLC communication. The PLC test application is easy to use and provides the ability to:   

• Verify trailer ABS ECU for MID 10 and MID 11 messages.
• Toggle in-cab trailer ABS warning lamp ON/OFF to confirm operation.
• Test tractor and trailer coupled or trailer independently for MID messages.

Requires NEXIQ PLC Converter Kit (PN 601020)

SUPERSEDES MPS804013

Drop Ship Only